XC6SLX16 based on Xilinx Spartan-6 FPGA features
- 14579 Logic cells
- 136 Kb of Block RAM
- 2 NOS of Clock Management Tiles (CMT)
- 2 NOS of Memory Controller Block (MCB)
- 186 User I/O lines
- 2278 kb of distributed RAM
- 32 NOS of DSP Slices
16 Nos of digital input using slide switches with LED indication
16 Nos of digital output using discrete LEDs
16x2 LCD is provided for display the text message
One Reset Switch
One switch for giving manual clock
FPGA configuration through
- On Board Xilinx USB to JTAG Programmer with isolation to configure FPGA
- On Board Flash Prom XCF04S (Programmable through USB to JTAG programmer)
Total 186 I/O Pins: 100 Pins used for integrating peripheral like LED, Switches etc., balance pins are available to user in 3 nos of 20 pin header.
1 No of 26 pin headers to interface VLIM cards like Traffic Light Controller / On-board TLC factory settable.
On board programmable PLL oscillator from 1MHz to 100Mhz using jumpers
4 Nos of 7 segment LED display
One relay and Buzzer provided
Stepper & DC motor drive provided on board (Motor Optional)
4 x 4 matrix keys provided
On Board I2C RTC interface
On Board Temperature sensor Interface
SPI Based Analog to Digital Converter
- Resolution : 12 bits
- Number of Channel : 2 Channel
- Input Range : 0 to 3.3V
- Speed : 1Msps
SPI Based Digital to Analog Converter
- Resolution : 12 bits
- Number of Channel : 2 Channel
- Input Range : 0 to 3.3V
- Speed : 8.5 µS setting time
ADC Inputs and DAC outputs are terminated at J801 connector
Housed in a sleek plastic cabinet with built in SMPS 5V/ 2A
Compatible with Xilinx ISE Web PACK Software (Version 12.1 and above)
.png)
